Selecting the picture viewing mode, Standard, Cinema – Sony VPL-VW50 User Manual
Page 32: User 1, user 2 and user 3, Enhances picture contrast and sharpness, Recommended when viewing a movie in the dark place
32
Selecting the Picture Viewing Mode
You can select the picture viewing mode that best suits the type of program or room
conditions.
Press one of the
PICTURE MODE buttons
(DYNAMIC, STANDARD,
CINEMA and USER 1, USER 2
and USER 3).
DYNAMIC
Enhances picture contrast and sharpness.
STANDARD
The quality of the picture becomes less
rough than the one selected by
“DYNAMIC”.
CINEMA
Recommended when viewing a movie in
the dark place.
USER 1, USER 2 and USER 3
You can adjust the quality of the picture to
suit your taste and store the settings into
the selected memory of the projector.
Press one of the USER 1, USER 2 and
USER 3 buttons, then adjust the picture
by using the buttons on the remote control
or the menus (
settings are stored, and you can view the
picture with the adjusted picture quality
by pressing the button.
INPUT
LIGHT
STANDARD
CINEMA
DYNAMIC
USER 2
PICTURE MODE
REAL COLOR PROCESSING
USER 3
USER 1
ADJ PIC
MENU
LENS
RCP
BRIGHT
CONTRAST
RESET
WIDE MODE
ENTER
PICTURE MODE
buttons
DYNAMIC
STANDARD
CINEMA
USER 1, USER 2
and USER 3