AMX Distribution Matrix Precis SD - Manual (Page 30)

Installation & Setup
25 Precis SD Instruction Manual
Cabling Video Connectors
The video connectors are color coded; the white BNC connectors are inputs and the black BNC
connectors are outputs.
Tip: Using lacer bars or some other type of cable management system lessens the strain from
cable weight on the connectors and makes servicing the enclosures easier.
For RGBHV signals, you need to attach corresponding input and output connectors on five connectors
to route the entire signal. FIG. 12 shows the 5 BNC cable connectors attached for routing the R, G, B, H,
and V signals through Output 8.
To connect video inputs and outputs:
1. Fasten the cable connectors onto the input and output BNC connectors.
For ultra-wideband video and sync specifications, see “Signal Specifications” on page 33.
FIG. 12 Five BNC connectors are required for RGBHV signal
R
G
B
H
V