Sony STR-DA5500ES - Manual (Page 117)

117 GB
Us
ing O
th
e
r
Fe
atures
4
Press V/v repeatedly to select
“Pass Through,” then press
or b.
5
Press V/v repeatedly to select
the parameter you want, then
press
or b.
Notes
• This function does not work when you set “Control
for HDMI” to “OFF.”
• This function is available only when you select
“HDMI A” or “HDMI A + B” using the HDMI
OUTPUT button. When you select “HDMI B” or
“OFF,” this function does not work.
• When “AUTO” is selected, it may take a little more
time for the picture and sound to be output to the
TV than when “ON” is selected.
Switching between
digital and analog audio
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Select the input source using
INPUT SELECTOR on the
receiver.
2
Press INPUT MODE on the
receiver.
The selected audio input mode appears on
the TV screen.
• Auto
Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
analog audio signals are selected.
• Analog
Specifies the analog audio signals input
to the AUDIO IN (L/R) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
Parameter Explanation
AUTO When the TV is turned on while
the receiver is in the standby
mode, the receiver outputs HDMI
signals from the receiver’s HDMI
OUT A jack. Sony recommends
this setting if you use a TV that is
compatible with “BRAVIA”
Sync. This setting saves power in
the standby mode compared with
the “ON” setting.
ON When the receiver is in the
standby mode, the receiver
continuously outputs HDMI
signals from the receiver’s HDMI
OUT A jack.
OFF The receiver does not output
HDMI signals when in the
standby mode. Turn on the
receiver to enjoy the connected
component’s source on the TV.
This setting saves power in the
standby mode, compared with the
“ON” setting.
INPUT MODE
INPUT SELECTOR
continued