Sony STR-DA5500ES User Manual
Multi channel av receiver, Str-da5500es, Operating instructions
E:\STR-DA5500ES\4145850111\4145850111STRDA5500ESUC\00COV-
STRDA5500ESUC\120BCO.fm
masterpage: Left
STR-DA5500ES
4-145-850-
11(1)
Printed in Malaysia
120BCO.fm Page 154 Wednesday, February 18, 2009 11:28 AM
E:\STR-DA5500ES\4145850111\4145850111STRDA5500ESCEL\00COV-
STRDA5500ESCEL\010COV.fm
Master:
Right
4-145-850-
11(1)
STR-DA5500ES
©2009 Sony Corporation
STR-DA5500ES
4-145-850-11(1)
Operating Instructions
Multi Channel
AV Receiver
010COV.fm Page 1 Wednesday, April 15, 2009 2:04 PM
Table of contents
Document Outline
- Table of Contents
- Description and location of parts
- Getting Started
- 1: Installing speakers
- 2: Connecting the monitor
- 3a: Connecting the audio components
- 3b: Connecting the video components
- 3c: Connecting the IR Blaster
- 4: Connecting the antennas (aerials)
- 5: Connecting to the network
- 6: Preparing the receiver and the remote
- 7: Setting the speakers
- 8: Calibrating the appropriate speaker settings automatically (Auto Calibration)
- 9: Configuring the network settings of the receiver
- 10: Preparing a computer to use as a server
- Guide to on-screen display operation
- Playback
- Tuning
- Listening to FM/AM radio
- Presetting FM/AM radio stations
- Listening to satellite radio (USA/Canadian model only)
- Connecting a satellite radio tuner
- Preparing to listen to a satellite radio
- Selecting a channel of the satellite radio
- Presetting satellite radio channels
- Restricting access to specific channels (Parental Lock) (SIRIUS only)
- Enjoying Surround Sound
- Using Network Features
- Using Multi-zone Features
- Using Other Features
- Using “BRAVIA” Sync features
- Switching the monitors that output the HDMI video signals
- Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)
- Switching between digital and analog audio
- Enjoying the sound/ images from other inputs (Input Assign)
- Using the sleep timer
- Enjoying the surround effect at low volume levels
- Recording using the receiver
- Switching the command mode of the receiver and the remote
- Using a bi-amplifier connection
- Adjusting Settings
- Operating Each Component Using the On-screen Remote (Quick Click)
- Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)
- Using Quick Click
- Setting components that are operated by the on- screen remote
- Performing several commands in sequence automatically with Quick Click (Macro Play)
- Setting remote control codes that are not stored in Quick Click
- Resetting the remote code for Quick Click
- Operating Each Component Using the Multifunction Remote
- Additional Information