Sony NEX-VG900 - Manual (Page 86)

Table of C
on
ten
ts
Sear
ch image
Inde
x
US
Language Setting
You can select the language to be used on
the LCD screen.
Tips
Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot find
your native tongue among the options.
24p Mode (NEX-VG900E only)
You can shoot 24p movies by the PAL-
based system.
If you select [OK] in the [24p Mode]
screen, the camcorder reboots in 24p mode.
When you select [OK] in the [Cancel 24p
Mode] screen, the camcorder reboots in
50i mode.
Notes
You cannot save 24p movies on a memory
card recorded by PAL-based system. You need
another memory card.
When you have activated [24p Mode], the
movie recording format is limited to AVCHD
24p (FX, FH). The format of the video signal
output from the camcorder is NTSC color.
Images may not be played back normally,
depending on the connected TV.
When you have activated [24p Mode], you
cannot set [ / Setting] to [ STD
Quality] or you cannot use [ Frame Rate].
Calibration
See page 103.
Battery Info
You can check the estimated remaining
capacity of the battery.
Touch in upper left on the screen.
Version
You can see the version of the lens and your
camcorder. You can use this function when
the firmware update of your camcorder was
released.






Notes
You should update only when using the AC
Adaptor. Otherwise, we recommend using a
fully charged battery.
The version of the lens may not be displayed in
any mode other than shooting mode.
Date & Time Setting
 Date & Time Format
You can select one from 4 types of date and
time format.
 Daylight Savings/Summer Time
You can change this setting without
stopping the clock. Set to [On] to move the
time forward 1 hour.
 Off
Does not set the summertime.
On
Sets the summertime.
 Date & Time
See page 22.
Area Setting
You can adjust a time difference without
stopping the clock. Select your local area
when using the camcorder in other time
zones. Refer to the world time difference
information on page 99.
 Home
Select this item when you are going to use
the camcorder in the area where you are
living.
Destination ( )
Select this item when you want to use
the camcorder with the area setting set to
another place.
Tips
If you visit a certain place often and want to
use the camcorder with the area setting set to
that place, it is useful if you set the place to
[Destination].




