Sony HDR-CX500V - Manual (Page 19)

1
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
Getting started
Step 1: Charging the battery pack
You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your
camcorder.
You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.
1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the  mark on the DC plug with that on the DC IN jack.
The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge)
lamp turns off when the battery pack is fully charged.


Battery pack
DC IN jack
DC plug
AC Adaptor
Power cord
(Mains lead)
/CHG (flash/charge)
lamp
To the wall outlet
(wall socket)
Access lamp