Sony PCG-Z505SX - Manual (Page 9)

Supplementary Information 9
Device Manager
You may notice that under Network Adapters on the Device Manager
tab, two of the network adapters are disabled. Your computer ships this
way to enable faster startup. To enable these adapters, follow the
instructions under “Enabling Smart Connect” and “Enabling a Network,”
below.
Enabling Smart Connect
Your computer comes with pre-installed Smart Connect software. Before
using Smart Connect, follow the instructions below to enable the
software:
1
Click the Windows Start button.
2
Select Settings, then click Control Panel. The Control Panel window
appears.
3
Click the System icon. The System Properties window appears.
4
Click the Device Manager tab.
5
Double-click Network Adapters. A list of adapters appears under
Network Adapters. The Sony i.LINK(1394) Adapter icon is crossed
out with a red “X.”