Sony BDP-S7200 - Manual (Page 38)

38
BDP-S7200
4-535-717-11(1)
master page=left E:\SONY
DVD\SD130037\4535717111_US\070ADD.fm
“Exxxx” or “TEMP” appears on the
front panel display.
, When “Exxxx” appears, contact your
nearest Sony dealer or local authorized
Sony service facility and give the error
code.
, When “TEMP” appears, place the
player in a location with adequate
ventilation to prevent heat build-up in
the player. “TEMP” will appear for a
short time.
The player does not respond to any
button.
, Moisture has condensed inside the
player (page 4).
Specifications
System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load
impedance)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A (For connecting a
USB memory, memory card reader,
digital still camera, and digital video
camera)
Wireless
Wireless LAN standard:
IEEE 802.11 b/g/n
Frequency range:
2.4 GHz band: Channels 1-11
Modulation:
DSSS and OFDM
General
Power requirements:
120 V AC, 60 Hz
Power consumption:
16 W
Dimensions (approx.):
430 mm × 210 mm × 49 mm
(17 in. × 8
3 / 8 in. × 1 15 / 16 in.)
(width/depth/height)
incl. projecting parts
Mass (approx.): 2.3 kg (5 lb 2 oz)
Operating temperature:
5 ºC to 35 ºC (41 °F to 95 °F)
Operating humidity:
25 % to 80 %
Supplied accessories
Remote commander (remote) (1)
Size AAA (R03) batteries (2)
Specifications and design are subject to
change without notice.