Connecting a multimedia projector – Sony VGN-S360P User Manual
Page 108
Connecting a multimedia projector
You can use a projector to display the actions and images from the computer screen (LCD).
To connect a multimedia projector
1.
Plug the projector's power cord into an AC outlet.
2.
Plug the display cable (not supplied) into the projector and the Monitor (VGA) port
on your computer.
To locate the Monitor port, see
.
Connecting a Multim edia Projector
3.
Plug the audio cable (not supplied) into the projector and the Headphones jack on your computer.
4.
Turn on the projector (if it is not already on), and then turn on your computer.
5.
Press the Fn+F7 key combination to toggle the display between your computer and the projector. See
for more information.
See the guide that accompanied your projector for more information on its installation and use.
Page 108