Sony DCR-PC350 - Manual (Page 11)

Quick Start Guide
Qu
ick S
ta
rt
Gu
id
e
11
3
Start recording while checking the subject on the LCD screen.
The date and time is not set up in the default setting. To set the date and time, see page 21.
4
View the recorded picture on the LCD screen.
a
Remove the lens cap.
b
Open the LCD panel.
c
While pressing the
green button, slide
the POWER switch
down to light up the
CAMERA-TAPE lamp.
The power turns on.
d
Press REC START/
STOP.
Recording starts. To
change to standby mode,
press REC START/STOP
again.
You can also use REC
START/STOP of the LCD
panel.
a
Slide the POWER
switch repeatedly
until the PLAY/EDIT
lamp lights up.
b
Touch (rewind).
c
Touch (play) to
start the playback.
To stop, press .
To turn off the power, slide the
POWER switch up to OFF
(CHG).