Sony VPL-VW200 - Manual (Page 78)

78
Ceiling Installation
Use the PSS-H10 Projector Suspension Support when you install the projector on a
ceiling. The projection distances for ceiling installation are shown below. Also, attach the
supplied air filter cover for the ventilation holes (intake) to prevent the air filter from
becoming clogged with dust.
When you use the projector placed on a floor, do not attach the air filter cover. If you attach it, the
air filter cover may get broken.
Note
When Using the PSS-H10 Projector Suspension Support
Air filter cover
Attach the air filter cover
with the
F mark on the air
filter cover facing to the
front.
a
x
a: Distance between the screen and the installation hole at the
ceiling side of the ceiling mount unit (front side)
x: Distance between the ceiling and the center of the screen such
that the picture will not be truncated or blocked
PSS-H10 Projector Suspension
Support (not supplied)
Ceiling
Center of the screen
Center of the lens