Sony VPL-VW200 - Manual (Page 67)

67
Ot
hers
8
Insert the new lamp unit straight
in all the way until it is securely
in place and you hear it click.
• Insert the new lamp unit while holding it
tightly, because it is heavy (approx. 2.9 kg
(6 lb 6 oz)). Dropping the lamp may result
in an injury.
• Be careful not to touch the fan or optical
block inside the unit.
• Confirm that the lamp release lever has
returned to its original position. If not, the
projector will not turn on.
9
Tighten the four screws
loosened in step 6 to secure the
lamp unit to the projector.
10
Tighten the screw loosened in
step 4 to close the lamp cover.
11
Close the top cover.
Notes