Sony VPL-VW200 - Manual (Page 25)

25
Conn
ect
ion
s a
nd
Prep
arat
ion
s
Tip
When “Lens Control” is set to “Off” on the Installation
menu, you cannot adjust the picture size
and the focus. ( 1 page 52)
When “Test Pattern” is set to “Off” on the Function menu, the test pattern is not displayed.
( 1 page 51)
To adjust the tilt of the installation surface
If the projector is installed on an uneven surface, use the adjusters to keep the projector
level.
Be careful not to catch your finger when turning the adjusters.
7
Adjust the focus.
Press the LENS button repeatedly
until the Lens Focus adjustment
window (test pattern) appears. Then
adjust the focus of the picture by
pressing the
M/m/
Note
Adjusters
Turn to adjust.