Sony SFM-1 - Manual (Page 10)

SFM1
Page 10 Installation Manual
Wood Stud Location
1. Using a stud finder, locate the 16” or 24” stud centers behind the wall.
2. Once found, make a pencil mark on the center of the wood studs (Figure 9).
NOTE: The wall plates have three 16” and 12” mounting slot positions.
16"
Figure 9. Locating the Wooden Stud
3. Measure from the floor to the desired viewing height and mark the wall (Figure 10).
NOTE: This marking will reference the center of your flat panel display once mounted to the wall.
16"
Figure 130. Measuring the Height
Wooden Studs
behind the Wall
Structure
Wooden Studs
Stud Finder
Measure and
Mark the Desired
Viewing Height
on the Wall