Sony KDP-65WS550 - Manual (Page 86)

85
SETU
P
i.LIN
K
S
E
TU
P
SETU
P
S
E
TU
P
i.LIN
K
Notes on Using This Connection
Notes on Connecting i.LINK Devices
To connect two or more i.LINK devices, use i.LINK cables to connect
them as shown below.
You can connect up to 63 i.LINK devices. However, the maximum
number of cables in any serial route is 16.
Do not connect i.LINK devices in a way that creates a loop.
Connecting non-compatible devices, such as PCs or PC peripherals,
may result in malfunctions.
To Do This ... Do This ...
Set up a digital
i.LINK device For digital i.LINK devices (devices that require only
the i.LINK connection), no setup is necessary. The TV
automatically recognizes the device as soon as the
connection is made.
Set up an i.LINK
device that supports
an EIA-775A analog
connection ❏ Connect analog A/V cables to the VIDEO 3 input
(see page 84).
❏ Use the i.LINK Control Panel to activate the
analog connection to your i.LINK device (see
page 89).
A B C D E
i.LINK i.LINK i.LINK i.LINK
A B C D
F G
E
i.LINK i.LINK i.LINK i.LINK
i.LINK i.LINK
A B C
i.LINK i.LINK
i.LINK
AX1 PJ.book Page 85 Wednesday, April 30, 2003 2:13 PM