AEG 49332I-MN - Manual (Page 10)

Display Description
Residual heat indicator: a cooking zone is still hot.
The lock/child safety function is on.
The Power function is on.
The automatic heat-up function is on.
ACTIVATING AND
DEACTIVATING THE HOB
Touch for 2 seconds to activate the
hob. Touch for 1 second to deactivate
the hob.
HEAT SETTING
Touch to increase the heat setting.
Touch to decrease the heat setting.
The display shows the heat setting. Touch
and at the same time to deactivate
the cooking zone.
AUTOMATIC HEAT-UP
The automatic heat-up function lets you
get the necessary heat setting in a shorter
time. It sets the highest heat setting for
some time (refer to the diagram), and
then decreases it to the necessary heat
setting.
1
2
3
4
5
6
7
8
9
10
11
0
1 2 3 4 5 6 7 8 9
To start the automatic heat-up:
1.
Touch . comes on in the dis-
play.
2.
Immediately touch . comes on
in the display.
3. Immediately touch again and
again until the necessary heat setting
comes on. After 3 seconds
comes
on in the display.
4. To deactivate the function touch .
POWER FUNCTION
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After that, the induction
cooking zone automatically changes back
to the highest heat setting. To activate,
touch
. comes on in the display. To
deactivate, touch or .
10 www.aeg.com