Sony VPL-VW40 User Manual

Page 18

To connect to a DVD player/recorder or Blu-ray Disc player
equipped with HDMI output

You can enjoy better picture quality by connecting a DVD player/recorder or Blu-ray Disc
player equipped with HDMI output to the HDMI input of the projector.

• When connecting equipment to the HDMI input of the projector, be sure to use

equipment that have acquired the HDMI logo.

• When connecting an HDMI cable to the projector, make sure the

mark on the upper

part of the HDMI input of the projector and the

mark on the connector of the cable is

set at the same position.

• If the picture from equipment connected to the projector with an HDMI cable is not

clear, check the settings of the connected equipment.

Notes

HDMI cable (not supplied)

: Video signal flow

Right side of the projector

DVD player/recorder or
Blu-ray Disc player, etc.,
with the HDMI output

to HDMI output

AV amplifier

Speakers

When using an optional HDMI cable, be sure to use
a cable that has acquired the HDMI logo.

............................................................................................................................................................
This projector supports PC display input of HDMI standards. It also supports HDCP.