Sony ICD-BX132 - Manual (Page 89)

7. While “ADD” is flashing, press REC/PAUSE.
The operation indicator lights in red, and the recording is added at the end of
the current file.
8. Press (stop) to stop recording.
Descriptions of menu items
You can select one of the menu items available.
ON:
The REC-OP function is active. You can add recording to the file being played, by
selecting “ADD” after selecting “REC-OP.”
OFF:
The REC-OP function does not work.
(Initial setting)
Note
You cannot add a recording if the remaining memory is insufficient.
You cannot add a recording to a protected file. To add a recording, release the
protection first.
The added portion of a file will be recorded in the same recording mode.
If 10 minutes have passed after step 6, you must start the procedure again from the
beginning.
Go to Page Top
4-448-103-11(1)
© 2013 Sony Corporation
83