Sony HDPS-M10 - Manual (Page 15)

15
Notes
• Do not format the internal hard disk of the unit with Windows or your Macintosh
computer. In particular, if formatted with Windows NTFS, you will no longer be able
to use the unit. If you partition the internal hard disk of the unit, make sure that the file
system of the first partition is FAT32.
• If the hard disk has been formatted using your computer or NTFS format, Error Code
F20 will be shown on the LCD display when it is turned on while not connected to a
computer. Reformat the internal hard disk. For details, see “If an HDD Format Error
(error code: F20) appears” (page 21).
Hints
• To delete files from the internal hard disk, see “Deleting unnecessary files and folders”
in the HDD Photo Storage Operating Instructions (PDF).
• Always disconnect the unit from the computer properly. For details, see
“Disconnecting the USB cable from the computer or removing media” in the HDD
Photo Storage Operating Instructions (PDF).
• When the drives of the HDD Photo Storage do not appear on the computer, uninstall
the device and turn it off. Power on the unit and wait for detection by the computer.