Sony PEG-NX60 - Manual (Page 78)

Customizing your Sony CLIÉ Handheld (Preferences) 78
Changing the Network preferences
Creating log in scripts
A log in script is a series of commands that automates logging in to a network
server, such as your corporate network or your Internet Service Provider (ISP).
You can also use non-ASCII characters or literal characters for Log in Scripts.
b
For details, refer to “Non-ASCII Characters for Log in Scripts” on page 80.
Note
Depending on the type of mobile communication adapter and communication adapter
(sold separately), there may be cases when there is no need to create a log in script.
b
For details on accessories that are not supplied, please refer to “Read This First
(Operating Instructions).”
1
On the Network Preferences screen, tap the service field.
2
Tap Details.
The Details screen is displayed.
3
Tap Script.
The Log in Script screen is displayed.
4
Tap the arrow V next to End and select one of the following
commands.
If the command requires additional information, a field appears to the right
of it for you to enter the information.
Wait For Tells your CLIÉ handheld to wait for specific characters
from the TCP/IP server before executing the next
command.
Wait For Prompt Detects a challenge-response prompt coming from the
server and displays the dynamically generated challenge
value. Then enter the challenge value into your token
card, which in turn generates a response value for you to
enter on your CLIÉ handheld. This command takes two
arguments, separated by a vertical bar (|) on the input line.
Send Transmits specific characters to the TCP/IP server to
which you are connecting.
Continued on next page
• • • • • • • • • • • • • • • • • • •