Sony PEG-NX60 - Manual (Page 106)

106
Performing a HotSync
®
operation via a modem
Exchanging and updating data using a HotSync
®
operation (Other
HotSync
®
operations)
5
Adjust the following settings as needed.
• Serial port : Specifies the port for the modem. If you are not sure of the
port settings, check the Modem Properties ( Phone and Modem
Options for Windows 2000 Professional/XP) in the Windows
Control Panel .
• Speed : Determines the speed at which data is transferred. Try the As
Fast As Possible rate first, and adjust downward if you have any
problems.
• Modem : Specifies the modem type or manufacturer. If you are not sure
of your modem type or if you cannot find your modem type in the list,
select
Hayes Basic .
• Setup string : Identifies the setup string for your modem automatically
if you specify the modem type or manufacturer. If it does not work
properly, refer to the manual of your modem.
6
Click OK.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for a modem HotSync
®
operation.
1
Rotate the Jog Dial™ navigator to select the HotSync icon
and press the Jog Dial™ navigator.
The HotSync dialog box is displayed.
Tip
You can also tap the HotSync icon on the Application Launcher screen to
display the HotSync dialog box.
2
Tap Modem.
Continued on next page
• • • • • • • • • • • • • • • • • • •