Sony PEG-NX60 - Manual (Page 110)

110 Exchanging and updating data using a HotSync
®
operation (Other
HotSync
®
operations)
Performing a HotSync
®
operation via a
network
You can perform a HotSync
®
operation via a network between your CLIÉ
handheld and the computer in the LAN of your office depending on the
network environment of your office. For details, contact the administrator of
the remote access server.
Prior to performing a HotSync
®
operation via a network
Check the following items.
• Both your company’s network system and its remote access server support
TCP/IP.
• You have a remote access account.
• Your CLIÉ handheld is properly connected to a Mobile Communication
adapter sold separately.
Preparing your computer
1
Click the HotSync icon in the Windows task tray
(bottom-right corner of the taskbar) and select Network from
the shortcut menu.
2
Click the HotSync icon in the Windows task tray again
and select Setup from the shortcut menu.
The Setup screen is displayed.
3
Click the Network tab.
4
Click the check box next to the user name for HotSync.
Click TCP/IP Settings and assign a subnet mask as needed. For details
on a subnet mask address, refer to the manual of your operating system or
contact the system administrator.
5
Click OK.
To operate HotSync
®
operations via a network, a person must be as
competent as a network administrator.
Continued on next page
• • • • • • • • • • • • • • • • • • •