Sony ICD-SX700D - Manual (Page 94)

ICD-SX700 4-127-576-11(1)
GB
Connecting the IC recorder
to your computer
You can transfer the IC recorder data
onto your computer by connecting the
IC recorder to the computer.
Use the USB connecting cable supplied
with the IC recorder to connect the
(USB) connectors of the IC recorder
and your computer.
The IC recorder is recognized by
the computer as soon as the cable
is connected. You can connect or
disconnect the cable when the IC
recorder and the computer are turned
on or off.
While the IC recorder is connected to the
computer, “CONNECTING” is displayed in
the display window of the IC recorder.
Computer
Notes
Do not connect more than two USB devices
to your computer. Normal operation will not
be guaranteed.
Use of this IC recorder with a USB hub or a
USB extension cable is not guaranteed.
A malfunction may occur depending on the
USB devices connected at any one time.
Before connecting the IC recorder to the
computer, check that batteries are inserted
in the IC recorder.
It is recommended that you disconnect the
cable from the computer when you do not
use the Digital Voice Editor.






To (USB)
connector
IC recorder
USB connecting cable
To USB
connector of
your computer