Sony HDR-CX900 - Manual (Page 27)

GB
27
R
e
co
rdi
n
g/
P
la
yba
ck
You can record the subject clearly by using the ND filter function when
the recording environment is too bright.
• If you change the ND filter setting during recording, the movie and sound
may be distorted.
• When the ND FILTER switch is set to AUTO, select OFF or 1 (1/4) of the ND
FILTER position. When you want to select 2 (1/16) or 3 (1/64), set the ND
FILTER switch to MANUAL.
You can focus manually, depending on the shooting conditions.
Adjusting the light intensity (ND filter)
1
Set the ND FILTER switch
 to MANUAL, and then
select the appropriate ND FILTER position
.
OFF: Turns off the ND filter function.
1: Reduces light intensity to 1/4.
2: Reduces light intensity to 1/16.
3: Reduces light intensity to 1/64.
Notes
Focusing or zooming with the lens ring
1
Press AF/MF
 to switch to manual focusing mode.
•
 appears when in manual focusing mode.
2
Operate the ZOOM/FOCUS switch
, and rotate the
lens ring
.
• FOCUS: You can focus manually by turning the lens ring.
•
ZOOM: You can zoom by turning the lens ring.