Sony STR-DH800 - Manual (Page 89)

89 US
S
-AI
R Oper
at
ions
x After pairing
Sound transmission is established between the
paired S-AIR main unit and S-AIR sub unit(s)
only.
1
Place the S-AIR sub unit that
you want to pair near the S-AIR
main unit.
2
Match the IDs of the S-AIR main
unit and the S-AIR sub unit.
• To set the ID of the S-AIR main unit,
see “To set the ID of the S-AIR main
unit” (page 87).
• To set the ID of the S-AIR sub unit,
refer to the operating instructions
supplied with the S-AIR sub unit.
3
Press AMP MENU.
4
Press V/v repeatedly to select
“S-AIR”.
5
Press or b to enter the
menu.
6
Press V/v repeatedly to select
“PAIRING”.
7
Press or b to enter the
parameter.
8
Press V/v repeatedly to select
the setting you want, then
press .
• START: The S-AIR main unit starts
pairing. “SEARCHING” flashes on the
display.
• CONDITION: You can check the
current ID. When the pairing setting is
not made, “NO PAIRING” appears on
the display.
9
Start pairing of the S-AIR sub
unit.
x For the surround amplifier
Refer to the operating instructions
supplied with the surround amplifier.
x For the S-AIR receiver
Refer to the operating instructions
supplied with the S-AIR receiver.
10
Pairing completed.
“COMPLETE” appears on the display.
To exit the menu
Press MENU/HOME or AMP MENU.
Note
Perform the pairing within several minutes after step
8. Otherwise, the pairing is canceled automatically
and “INCOMPLETE” appears on the display.
To cancel pairing
Reset the ID of the S-AIR main unit.
For details, see “To set the ID of the S-AIR
main unit” (page 87). You can select the same
ID as before.
ID A
ID A
ID A
?/1
PHONES
SPEAKERS INPUT SELECTOR
INPUT MODE TUNING MODE
MASTER VOLUME
TONE MODE DISPLAY DIMMER MUTING MEMORY/ ENTER 2CH/ A.DIRECT A.F.D. MOVIE MUSIC TUNING
TONE
VIDEO 2 IN VIDEO L AUDIO R AUTO CAL MIC
Your room
S-AIR main unit
S-AIR sub unit S-AIR sub unit
Neighbor
No transmission
Pairing