Sony STR-DH800 - Manual (Page 42)

42 US
To activate the muting function
Press MUTING on the remote.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press one of the input buttons
to select the input you want to
create an index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
3
Press V/v repeatedly to select
“SYSTEM”.
4
Press or b to enter the
menu.
5
Press V/v repeatedly to select
“NAME IN”.
6
Press or b to enter the
parameter.
The cursor flashes and you can select a
character.
7
Press V/v to select a character,
then press B/b to move the
cursor to the next position.
If you made a mistake
Press
B/b until the character you want to
change flashes, then press V/v to select
the correct character.
Tips
• You can select the character type as follows
by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
• To enter a blank space, press b without
selecting a character.
8
Press .
The name you entered is registered.
Naming inputs