Sony PEG-N760C - Manual (Page 22)

22
Step 1: Charging your Sony CLIÉ Handheld
Charging with the cradle
Note
Before you use your CLIÉ handheld for the first time, make sure to charge it.
Connect the supplied cradle to an AC power source in advance.
Charging will start as soon as you place your CLIÉ handheld on the
cradle. The battery icon in the screen changes to the battery charging
icon (
).
It takes about 4 hours for your CLIÉ handheld to be fully charged for
the first time. Subsequent charges, if it is charged frequently, will
require less time.
When you place your CLIÉ handheld on the cradle, the cradle
indicator turns on and charging starts.
When charging is completed
When you remove your CLIÉ handheld from the cradle, the battery
charging icon changes to the battery icon (
).
The cradle indicator remains on even after charging is complete.
Notes
• If the battery in your CLIÉ handheld is fully discharged, all data stored on
the DRAM (memory) is lost. Performing another HotSync operation once the
battery is recharged can restore information saved from the last HotSync
operation.
• Do not connect the headphones jack on your CLIÉ handheld with the LINE
input connector while your CLIÉ handheld is being charged.
To the wall
outlet
Insert your CLIÉ handheld at an
angle to the cradle and lay it
back to fit into place.