Sony ICD-P620 - Manual (Page 12)

ICD-P620 GB 3-295-268-11 (2)
1
GB
3
Set the time.
 Press –  or  + to select the
digits of the hour.
 Press  PLAY/ENTER.
The minute digits will flash.
 Set the minute.
 Press  PLAY/ENTER at the time
signal.
The display will return to “SET DATE.”
 Press  (stop) to exit from the menu
mode.
If the unit is left unused for more
than 3 seconds in the stop mode, the
display will show the current time.
Tips
This unit does not have a power on/off
switch. The display is shown at all times.
You can select the 12-hour display using the
menu. To set the 12-hour display, select “12H”
in the “HOUR” menu. In that case, “AM12:00”
will appear in step 2-
 .


