Sony HDR-CX430V - Manual (Page 18)

1
GB
To fasten the grip belt
To attach the Step Down Ring
Align the Step Down Ring with the
camcorder properly (), then turn it in the
direction of the arrow until the Step Down
Ring is locked in place ().
You can change the filter diameter to 37mm
(1 1/2 in.) by attaching the Step Down Ring,
allowing you to use the recommended
conversion lens.
You cannot attach the wide end conversion
lens/wide conversion lens, if the Step Down
Ring is attached.
To remove Step Down Ring, turn it in the
opposite direction from that of the arrow.


