Sony PEG-S360 - Manual (Page 15)

Slide Show
What is Slide Show?
The Slide Show function automatically displays two or more pictures
in a preset order. PictureGear Pocket helps you set the sequence
for displaying pictures, interval of display, and fade effect.
Slide Show is controlled by the [Slide Show] dialog box.
To display the [Slide Show] dialog box, tap [Slide Show] icon at the
bottom of the screen in the selection mode ([Preview Mode] or [List
Mode]).
Starting the Slide Show
By tapping the [Start] button in the [Slide Show] dialog box, the
screen is changed to full screen display and the pictures in the
category are displayed in order.
Ending the Slide Show
While the Slide Show is displayed, either click the Jog Dial
navigator, or tap the screen to end the Slide Show.
The selection mode reappears.
If the loop is not set, the Slide Show is ended automatically after the
last picture is displayed and the selection mode reappears.
[Order]
The order of pictures displayed here is the
display sequence of the Slide Show. The
sequence displayed in the selection mode is
used for the initial setting.
To change the order, drag and drop the titles.
[Interval]
Set an interval for displaying a picture. Select
the interval from the Drop-Down Menu.
[Fade]
Set the fade effect to run.
[Loop]
By selecting this box, the Slide Show is
repeated automatically from the starting
picture after the last picture is displayed.
[Start]
Closes the [Slide Show] dialog box and starts
the Slide Show.
[Cancel]
Closes the [Slide Show] dialog box.
2.5
PictureGear Pocket
Browsing Pictures / Slide Show
1
Setup
and
Startup
2
Viewing
and
Organizing
Pictures
3
Advanced
Functions
of
PictureGear
Pocket
4
PictureGear
Lite
[Fade]
When a picture is changed to
another picture, the currently
displayed picture gradually
fades off and then the next
picture appears. This is called
the "fade effect."
[Slide Show] dialog
[Slide Show] icon