Sony DCR-HC20 - Manual (Page 51)

Cu
stom
izin
g You
r Camco
rde
r
Customizing Your Camcorder 51
Using the (LCD/VF
SET) menu
– LCD B.L./LCD COLOR/VF B.L.
You can select items listed below on the LCD/
VF SET menu. To select items, see “Changing
the menu settings” (p. 43).
The default settings are marked with G. The
screen shows the items you can operate at the
moment. Unavailable items will be grayed out.
LCD B.L.
You can adjust the brightness of the LCD screen’s backlight. The recorded picture
will not be affected by this setting.
b Notes
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the battery life is reduced by about 10 percent during
recording.
LCD COLOR
Touch / to adjust the color on the LCD screen. The recorded picture
will not be affected by this setting.
VF B.L.
You can adjust the brightness of the viewfinder. The recorded picture will not be
affected by this setting.
b Notes
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the battery life is reduced by about 10 percent during
recording.
LCD/VF SET
LCD B. L.
LCD COLOR
VF B. L.
EXEC RET.
STBY
G BRT NORMAL Standard brightness.
BRIGHT Select to brighten the LCD screen.
G BRT NORMAL Standard brightness.
BRIGHT Select to brighten the viewfinder screen.
Low intensity High intensity