Sony STR-DA3600ES User Manual
Multi channel av receiver, Str-da3600es, Operating instructions

E:\STR-DA3600ES_rev\4184698121\4184698121STRDA3600ESCEL\00COV-
STRDA3600ESCEL\120BCO.fm
masterpage: Left
STR-DA3600ES
4-184-698-
12(1)
Printed in Malaysia
120BCO.fm Page 154 Wednesday, May 12, 2010 3:24 PM
E:\STR-DA3600ES_rev\4184698121\4184698121STRDA3600ESCEL\00COV-
STRDA3600ESCEL\010COV.fm
Master:
Right
4-184-698-
12(1)
STR-DA3600ES
©2010 Sony Corporation
STR-DA3600ES
4-184-698-12(1)
Operating Instructions
Multi Channel
AV Receiver
010COV.fm Page 1 Wednesday, May 12, 2010 3:22 PM
Table of contents
Document Outline
- Table of Contents
- Description and location of parts
- Getting Started
- Checking the connection appropriate for your components
- 1: Installing speakers
- 2: Connecting the monitor
- 3: Connecting the video components
- 4: Connecting the audio components
- 5: Connecting the IR Blaster
- 6: Connecting the antennas (aerials)
- 7: Connecting to the network
- 8: Preparing the receiver and the remote
- 9: Setting the speakers
- 10: Calibrating the appropriate speaker settings automatically (Auto Calibration)
- 11: Configuring the network settings of the receiver
- 12: Preparing a computer to use as a server
- Guide to on-screen display operation
- Playback
- Tuning
- Listening to FM/AM radio
- Presetting FM/AM radio stations
- Listening to satellite radio (USA/Canadian model only)
- Connecting a satellite radio tuner
- Preparing to listen to a satellite radio
- Selecting a channel of the satellite radio
- Presetting satellite radio channels
- Restricting access to specific channels (Parental Lock)
- Enjoying Surround Sound
- Using Network Features
- Using Multi-zone Features
- Using Other Features
- Using “BRAVIA” Sync features
- Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)
- Switching between digital and analog audio
- Enjoying the sound/images from other inputs (Input Assign)
- Using the sleep timer
- Enjoying the surround effect at low volume levels (Night Mode)
- Recording using the receiver
- Switching the command mode of the receiver and the remote
- Using a bi-amplifier connection
- Adjusting Settings
- For Installation Purposes: Operating Each Component Using an External Control Device (Quick Click)
- Operating components or lighting connected to the receiver using an external control device (Quick Click)
- Using Quick Click
- Setting components that are operated by an external control device
- Performing several commands in sequence automatically with Quick Click (Macro Play)
- Setting remote control codes that are not stored in Quick Click
- Resetting the remote code for Quick Click
- Operating Each Component Using the Multifunction Remote
- Additional Information