Sony MEX-R5 User Manual
Page 40
40
01GB02CD-EUR.fm
masterpage:Left
MEX-R1/MEX-R5
2-581-681-12 (1)
Tips
• To correct or erase a character, overwrite or enter
“
.”
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• “REP-TRACK” and all shuffle play are suspended
until the labelling is complete.
Deleting the custom name
1
Select the unit that has stored the
custom name you want to delete, then
press
(SYSTEM MENU)
.
2
Press
M
/
m
repeatedly until “NAME
DEL” appears, then press
(ENTER)
.
The stored name will appear.
3
Press
M
/
m
repeatedly to select the
name you want to delete.
4
Press and hold
(ENTER)
.
The name is deleted. Repeat step 3 and 4 if
you want to delete other names.
5
Press
(SYSTEM MENU)
twice.
The unit returns to normal play mode.
Locating a disc by name — list-up
You can select a disc from the list when
connecting a CD changer with the CUSTOM
FILE function or an MD changer.
If you assign a name to a disc, the name appears
on the list.
1
During playback, press
(LIST)
.
The disc number and disc name will appear.
2
Press
M
/
m
repeatedly until the desired
disc appears.
3
Press
(ENTER)
to play the disc.
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on the main unit or the card remote commander.
The following controls on the rotary commander
require a different operation from the main unit
or the card remote commander.
•
PRESET/DISC control
To select preset stations; control CD, the same
as (3)/(4) (ALBM –/+) on the main unit or
M/
m on the card remote commander (push in and
rotate).
•
VOL (volume) control
The same as the volume +/– buttons (rotate).
•
SEEK/AMS control
The same as (SEEK) +/– on the main unit or
./> on the card remote commander
(rotate, or rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
While pushing the VOL control, press
and hold
(SOUND)
.
Tip
You can also change the operative direction of these
controls in the menu (page 38).
SOUND
DSPL
MODE
SOUND
DSPL
MODE
OFF
ATT
SOUND
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET/
DISC
To increase
To decrease