American DJ 4Play - Manual (Page 2)

General Operation:
This fixture is designed to operate as a stand alone unit, there is no
need of a controller. It has been tested and lamped at the factory there
is no assembly necessary. The 4-Play™ is ready to be plugged in and
used right out of the box. There is no power switch, after plugging the
unit if there is no lamp output check the fuse and bulb. Sometimes
the lamp becomes loose during shipping and transit. If lamp does not
turn on after you plug the unit in, open the lamp cover to be sure the
lamp is seated properly. If the fuse and bulb are good, please call our
customer support line for further instructions.
After plugging the 4-Play™ in, the unit will produce multiple colored
beams that rotate in a circular motion. The four dichoric mirrors of the
4-Play™ can be adjusted, to optimize area coverage. The 4-Play™
will react to low frequencies of music via an internal microphone. This
fixture features a light weight case design and a hanging bracket. This
fixture is designed for mobile DJ’s, clubs, bands, roller rinks and any
arena that requires a compact, light weight, easy to use fixture.
Be sure not to obstruct cooling vents and keep in a well ventilated
area. For best results, use fog or special effects smoke to see the
beams of light.
© American DJ Supply ® - www.americandj.com - 4-Play™ Instruction Manual Page 3 © American DJ Supply ® - www.americandj.com - 4-Play™ Instruction Manual Page 4
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy club use we
recommend cleaning on a monthly basis. Periodic cleaning will ensure
longevity, and crisp output.
4-Play™ Cleaning
4-Play™ Fuse & Lamp Replacement
4-Play™ Basic Operation
Caution: Always replace with the exact same type lamp and
fuse, unless otherwise specified by an authorized American DJ
®
technician.
Fuse Replacement:
Disconnect the unit’s main power supply. Find the fuse holder located
on the rear of the, next to the power cord. Insert a standard flat head
screw driver in to the fuse holder housing. Turn the screwdriver in
counter-clockwise direction to remove the fuse holder. Remove the old
fuse and discard it, replace the fuse with the same type. Insert the fuse
holder with the new fuse back into it’s housing.
If you continue to blow fuses, STOP using the unit. Return the
unit for servicing. Continuing to use the unit may cause serious
damage.
4-Play™ Fuse & Lamp Replacement Cont.
Lamp Replacement:
Disconnect the unit’s main power supply. Located the lamp cover on
the front of the unit. Remove the thumb screw that retains the lamp
cover and remove the lamp cover. Remove the old lamp and replace
with a new one. Be sure to follow all the lamp handling instructions that
are included with the new lamp. Reassemble in reverse order.
Caution: Never touch a new lamp with your bare fingers. If you
continue to blow lamps, STOP using the unit. Return the unit for
servicing. Continuing to use the unit may cause serious damage.