Sony DCR-PC115 - Manual (Page 112)

112
You can record still images on “Memory Stick”s.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Keep pressing PHOTO lightly until the desired still image appears. The green
z mark stops flashing, then lights up. The brightness of the image and focus
are adjusted, being targeted for the middle of the image and are fixed.
Recording does not start yet.
(3) Press PHOTO deeper.
The still image will be displayed after the shutter sounds.
Recording is complete when the bar scroll indicator disappears.
The image when you pressed PHOTO deeper will be recorded on the
“Memory Stick.”
When the POWER switch is set to MEMORY
The following functions do not work:
– Wide mode
– Digital zoom
– SteadyShot function
– SUPER NIGHTSHOT
– Fader
– Picture effect
– Digital effect
– Title
– Low lux of PROGRAM AE (The indicator flashes.)
– Sports lesson of PROGRAM AE (The indicator flashes.)
Recording still images on “Memory
Stick”s – Memory Photo recording
3
2
1 / 12 SFN
1360
SFN
1360
PHOTO
PHOTO
1
LOCK
LOCK
POWER
V
C
R
M
EM
ORY
C
A
M
ER
A
OFF (CHG)
[a][b]
[a]: Number of recorded images
[b]: Approximate number of
images can be recorded on
the “Memory Stick”