Sony ICD-SX750 - Manual (Page 51)

ICD-SX750 4-157-612-11(1)
1
GB
Re
co
rd
in
g
4
Press  or  to select “ON,”
then press  .
5
Press  (stop) to exit the menu
mode.
6
Connect other equipment to the IC
recorder when the IC recorder is in
the stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment
to the  (microphone) jack of the IC
recorder using an audio connecting
cable*.
“SELECT INPUT” appears in the display
window.
7
Press  or  to select “AUDIO
IN,” then press  .
8
Press  (record/pause) to start
recording.
“
” flashes and the IC recorder
enters the recording pause mode.
9
Start playback on the component
connected to the IC recorder.
“
” appears on the display and
synchronized recording starts.
The synchronized recording pauses
when no sound is detected for more
than 2 seconds, and “ ” flashes.
The IC recorder starts recording again as
a new message when sound is detected.
Notes
During synchronized recording, you cannot
divide a recording message (page 43), you
cannot pause recording (page 29), you
cannot record with the VOR function or
you cannot record with the pre-recording
function.
Depending on the equipment connected to
the IC recorder, the synchronized recording
function may not operate properly due to a
difference in the audio input level.


