Cutting out low frequency – the lcf function, Cutting out low frequency, The lcf function – Sony ICD-SX750 User Manual

Page 40

ICD-SX750 4-157-612-11(1)

Notes

If you start recording with pre-recording

function using the built-in microphones,

a click noise may be recorded when you

press



(record/pause). To record with pre-

recording function, we recommend using an

external microphone.
When the remaining recordable time is less

than 10 seconds, the pre-recording function

is disabled.
When 60 minutes have passed after the

IC recorder entered the standby mode,

the standby mode will be cancelled and

recording stops.
If you stop recording before step 8, sounds

buffered in the memory will not be saved.

To cancel the pre-recording

function

Set “PRE REC” to “OFF” in step 4.





Cutting out Low

Frequency – the LCF

Function





/MENU





When you set the LCF (Low Cut Filter)

function to “ON” in the stop or recording

mode, you cut out a frequency of lower

than 200 Hz to reduce the roaring noise

from wind, etc., this helps to record a

sound source more clearly.

The LCF function is set to “OFF” when you

purchase the IC recorder.