Connecting a multimedia computer monitor or, Projector – Sony PCG-Z1WAP User Manual
Page 139
Connecting a multimedia computer monitor or projector
You can connect a multimedia device, such as a multimedia computer monitor or projector, to your computer. Connecting a
multimedia device enables you to display images on your computer screen (LCD), the multimedia device, or both.
To connect a multimedia computer monitor or projector
1.
Plug the device into an AC outlet.
2.
Plug the video cable into the Monitor (VGA) port
on your computer. If you are using a multimedia computer
monitor, which has built-in speakers and a microphone, plug the audio cable into the Headphone jack
on your
computer to hear sound.
To locate the Monitor port and Headphone jack, see "Locating Controls and Ports" in the "Setting Up" chapter of
your printed VAIO
®
Computer Quick Start.
Connecting a Projector
3.
Turn on the device (if it is not already on), and then turn on your computer.
4.
Press the Fn+F7 key combination to toggle the display between your computer, the monitor, or both. See
If the image from the projector is too large to fit within the frame of the display, reduce the screen resolution to
1024x768 or lower.
See the guide that accompanied your projector for more information on its installation and use.
Page 139