Sony DCR-PC330 - Manual (Page 38)

Other functions 38
DCR-PC330/IP1
3-084-946-11(1)
G:\BackUP(E)\PC(3084946111)\0729PC_GB\3084946111\3084946111_PC\01US05ADV.fm
master:Right
1
Start up the computer, and double-
click [ImageMixer Ver.1.5 for Sony]
displayed on the desktop.
2
Click (Capture Environment).
3
Click (DV Camcorder Capture
Mode).
z Tip
• You can also use the USB cable to connect your
camcorder and computer for converting signals.
Click
(USB Device Capture Mode) in this case.
4
Click (Preference), check
[Capture using DV Cam.] in [DVC
Capture settings], then click [OK].
5
Connect your camcorder to the
computer using an i.LINK cable
(optional), then connect it to a VCR
(analog equipment) using the A/V
connecting cable (supplied).
b Note
• When you connect your camcorder to a
computer, make sure you insert the connector in
the correct direction. If you insert the connector
forcibly, it may be damaged, and causes a
malfunction of your camcorder.
6
Prepare the power source for your
camcorder, then slide the POWER
switch repeatedly to select the PLAY/
EDIT mode.
7
Touch [P-MENU], [MENU] and [A/
V
tDV OUT], then touch to select
[ON].
For details, refer to the separate Camera
Operations Guide supplied with your
camcorder.