Sony VGN-X505ZP - Manual (Page 87)

Connecting a projector
You can use a projector to display the actions and images from the computer screen (LCD).
To connect a projector
1. Plug the projector into an AC outlet.
2. Plug the VGA/Ethernet adapter into the multipurpose port on the computer. (See Locating Controls and Ports for
more information.)
3. Plug the display cable into the Monitor (VGA) port on the VGA/Ethernet adapter.
Connecting a Projector
4. Turn on the projector (if it is not already on), and then turn on your computer.
5. Press the Fn+F7 key combination to toggle the display between your computer and the projector. See Selecting
a display for more information.
See the guide that accompanied your projector for more information on its installation and use.
Page 87