Sony DSC-RX100M2COS - Manual (Page 27)

GB
27
GB
*1
Appears when an Eye-Fi card (sold separately) is inserted into the camera.
HDMI Resolution
Sets the resolution when the camera is connected to an
HDMI TV.
CTRL FOR HDMI
Operates the camera from a TV that supports
“BRAVIA” Sync.
USB Connection Sets the USB connection method.
USB LUN Setting
Enhances compatibility by limiting the functions of USB
connection.
USB Power Supply Sets whether to supply power using a USB connection.
Audio signals Sets the operating sound of the camera.
WPS Push
You can register the access point to the camera easily by
pushing the WPS button.
Access Point
Settings You can register your access point manually.
Edit Device Name
You can change the device name under Wi-Fi Direct,
etc.
Disp MAC Address Displays the MAC address of the camera.
SSID/PW Reset
Resets the SSID and password of smartphone
connection.
Airplane Mode
You can set this device to not perform wireless
communications.
Version Displays the camera software version.
Language Selects the language.
Drop Sensor Sets the [Drop Sensor] function.
Demo Mode Sets demonstration playback of a movie to on or off.
Initialize Restores settings to their defaults.