Sony NSC-GC1 - Manual (Page 9)

9
3 Turning the camera on/setting the clock
1 Open the LCD panel to turn the power on.
Open and lift the LCD panel up to a 90 degrees angle from the camera (1), then rotate it to the desired
angle (2).
You can also turn the power on by pressing POWER button.
2 Set the clock with the Multi-selector.
1 Select the date display format with v/V.
2 Select each item with b/B and set the numeric value with v/V.
3 Select [OK].
To turn the power off
Press POWER button.
[ To change the date and time
Press MENU, and select [Clock Set] in (Setup 2) (page 15).
[ To change the language
Press MENU, and select [ Language] in (Setup 1) (page 15).
• You can turn off the operation beeps by selecting [Beep] in (Setup 1) (page 15).
/ : /
Tilt the Multi-selector side to side and up and down to
select, and press the center to set the setting.
LCD screen
POWER button
Multi-selector
MENU button
2 180 degrees (max.)
2 90 degrees (max.) 1 90 degrees (max.)
2
1
1