Sony PCG-R505JSK - Manual (Page 19)

Using PC Cards
19
Using PC Cards
Your notebook includes a PC Card slot. PC Cards allow you to connect portable
external devices.
To insert a PC Card
1 Insert the PC Card into the PC Card slot with front label facing up.
2 Gently push the card into the slot until the card is fixed into the connector
and the release button pops out.
✍
Note the following:
❑ The PC Card slot can accommodate one Type I or Type II PC Card and is
compatible with a CardBus.
❑ Some PC Cards may require that you disable idle devices when using the PC
Card. You can use Sony Notebook Setup to disable devices. See “Displaying the
Sony Notebook Setup Screen” for more information.
❑ Be sure to use the most recent software driver provided by the PC Card
manufacturer.
❑ If an “!” mark appears on the Device Manager tab in the System Properties dialog
box, remove the software driver then reinstall it.
✍
You do not need to shut down the notebook before inserting or removing a PC Card.
Inserting PC Card
PC Card
Insert with the arrow
facing forward.