Energy station handling – Sony ERS-7M3 User Manual
Page 144
144
•
When carrying or storing the “Memory Stick” media, keep it in the supplied case.
•
The contents of the AIBO-ware “Memory Stick™” media cannot be copied to another
“Memory Stick” media. Doing so contravenes with the clauses of the End-User License
Agreement and may void your authority to use this product.
•
Sony
®
assumes no responsibility for any malfunctions that may occur as a result of using
the AIBO
®
Entertainment Robot in a way not specified in this manual.
•
The specifications of the AIBO MIND 3 software are subject to change without notice.
What is an AIBO-ware “Memory Stick” media?
It is a media produced by Sony exclusively for use with the AIBO robot, that contains
application software that can only be executed on the AIBO robot.
Caution
•
Do not set the safety switch of the “Memory Stick” media to “LOCK”.
Doing so will make it impossible for the AIBO robot’s learning and
picture taking functions to work.
•
If the safety switch on the “Memory Stick” media is set to “LOCK”, the
AIBO robot’s face lights will turn red to warn you when you press the
pause button to start the AIBO robot up. Press the pause button once more
to put the AIBO robot in Pause mode, then unlock the safety switch on the
“Memory Stick” media.
When the AIBO robot starts up normally, the face lights turn white.
Energy Station handling
•
While the AIBO robot is on top of the Energy Station, do not place any object near it that
might interfere with its movements.
•
Do not touch the charging contacts directly with your hand. Touching the contacts will
reduce contact quality.
•
Before moving the Energy Station, detach the station marker, station pole, and foot
stopper.
•
Do not press down hard on the Energy Station with your hand or elbow.
•
Do not drop or shake the Energy Station as this may damage it.
•
To prevent deformation and other damage, do not leave the Energy Station in very hot
places, such as in a car parked in the sun.
•
Do not allow the Energy Station to get wet.
•
Do not bend the station marker or subject it to strong force as this may damage it.