Clean the flash surface before use. The heat of the flash emission may cause dirt
on the flash surface to start smoking or burning. Wipe the flash surface with a soft
cloth to remove dirt or dust, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth slightly moistened with water, then wipe
the surface with a dry cloth. To prevent damage to the finish or casing:

Do not expose the camera to chemical products such as thinner, benzine,
alcohol, disposable cloths, insect repellent, sunscreen or insecticide.
Do not touch the camera with any of the above on your hand.
Do not leave the camera in contact with rubber or vinyl for a long time.

170