beautypg.com

Getting started, Unpacking 4 hookup overview 4, Unpacking – Sony STR-DE435 User Manual

Page 4: Hookup overview, Inserting batteries into the remote, Before you get started

background image

4

Getting Started

Unpacking

Check that you received the following items with the
receiver:
• FM wire antenna (1)
• AM loop antenna (1)
• Remote commander (remote) (1)

Model

Remote

STR-DE535

RM-LJ302

STR-DE435 and

RM-PP402

STR-SE491

• LR6 (size-AA) batteries (3) (STR-DE535 only)
• R6 (size-AA) bateries (2)

(STR-DE435 and STR-SE491 only)

• Operating Instructions of the remote
• Operating Instructions of CONTROL A1 II

Inserting batteries into the remote

Insert the LR6 (STR-DE535) or R6 (STR-DE435 and
STR-SE491) (Size AA) batteries with the + and –
properly oriented in the battery compartment. When
using the remote, point it at the remote sensor
(STR-DE535) or g (STR-DE435 and STR-SE491) on the
receiver. For details, refer to the operating instructions
supplied with your remote.

You cannot operate the following buttons on the

RM-PP402 remote (STR-DE435 and STR-SE491 only)

• VIDEO2
• VIDEO3
• DVD
• PHONO (except STR-SE491)
• SOUND FIELD A.F.D.

Notes

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or

lighting apparatuses. Doing so may cause a malfunction.

• If you don’t use the remote for an extended period of time,

remove the batteries to avoid possible damage from
battery leakage and corrosion.

Hookup Overview

The receiver allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jack, see “Rear
Panel Descriptions” on page 28.

Before you get started

• Turn off the power to all components before making

any connections.

• Do not connect the AC power cords until all of the

connections are completed.

• Be sure to make connections firmly to avoid hum

and noise.

• When connecting an audio/video cable, be sure to

match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.

Front

speaker

(L)

Front

speaker

(R)

Speaker
System
Hookups (7)

CD player

MD/Tape deck

Turntable

(except STR-

DE435)

Active

woofer

AM/FM antenna

Antenna Hookups (5)

Video Component
Hookups (6)

Center

speaker

DVD player/

AC-3 decoder

Audio Component
Hookups (5)

Rear

speaker

(R)

Rear

speaker

(L)

TV tuner

SAT (Satellite

receiver)

VCR

TV monitor

(except STR-

SE491)

This manual is related to the following products: