Sony PCV-RZ51 - Manual (Page 37)

Connecting the Telephone and Modem Cables
1. Unplug your telephone from the wall jack and plug it into the telephone jack, located on the back panel of your
computer.
2. Plug the modem cable (supplied) into the Line jack, located on the back panel of your computer.
3. Plug the other end of the modem cable into the wall jack.
To connect the telephone and m odem cables
Your computer has a protective sticker covering the Ethernet port located on the rear panel. Connect
10BASE-T, 100BASE-TX or 1000BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may
result in an electric current overload that can cause a malfunction, excessive heat, or fire in the Ethernet port. For help
on connecting to a network, see your network administrator.
Page 37