Sony DVP-NS90V - Manual (Page 54)

D:\SONY DVD\2634583121 DVP-
NS90V_US\SOURCE\DVP-
NS90V_US\01US10ADV2-CEK.fm master page=left
54
DVP-NS90V
2-634-583-11(1)
3
Press X/x to select the setting.
• OFF : To cancel the “BNR” effect.
• ON : To turn on the “BNR” effect.
4
Press ENTER.
The disc plays with the setting you
selected.
To cancel the “BNR” setting
Select “OFF” in step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Notes
• If the outlines of the images on your screen should
become blurred, set “BNR” to “OFF.”
• Depending on the disc or the scene being played,
there may be no “BNR” effect, or it may be hard
to discern.
Adjusting the MNR
The “MNR” function adjusts the picture
quality by reducing the faint noise appearing
around the outlines of the images.
The noise reduction effects are automatically
adjusted within each setting range according
to the video bit rate and other factors.
1
Press DISPLAY twice during
playback.
The Control Menu appears.
2
Press X/x to select
(MNR), then press ENTER.
The options for “MNR” appear.
3
Press X/x to select the setting.
• OFF : To cancel the “MNR” effect.
• ON : To turn on the “MNR” effect.
4
Press ENTER.
The disc plays with the setting you
selected.
To cancel the “MNR” setting
Select “OFF” in step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Notes
• If the outlines of the images on your screen should
become blurred, set “MNR” to “OFF.”
• Depending on the disc or the scene being played,
there may be no “MNR” effect, or it may be hard
to discern.
OFF
ON
DVD VIDEO
OFF