L0 - hookups, L1ac - hooking up the player, L1 - step 1: unpacking – Sony DVP-NS90V User Manual

Page 17: L1 - step 2: inserting batteries into the remote, Hookups, Hooking up the player, Step 1: unpacking, Step 2: inserting batteries into the remote

D:\SONY DVD\2634583121 DVP-
NS90V_US\SOURCE\DVP-
NS90V_US\01US05GET-CEK.fm

master page=right

ook

up
s

DVP-NS90V

2-634-583-11(1)

Hookups

Hooking Up the Player

Follow steps 1 to 6 to hook up and adjust the settings of the player.

Notes

• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this player to a TV that does not have a video input jack.
• Be sure to disconnect the power cord of each component before connecting.

Step 1: Unpacking

Check that you have the following items:
• Audio/Video cord (phono plug

y phono plug

3) (1)

• Remote commander (remote) (1)
• Size AA (R6) batteries (2)

Step 2: Inserting Batteries Into the Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor

on the player.

Notes

• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a

malfunction.

• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage

from battery leakage and corrosion.

continued