Sony HDR-PJ810 - Manual (Page 30)

GB
30
1/25 second (HDR-PJ810E/
PJ820E))
*3
The unique pixel array of
Sony’s ClearVid and the
image processing system
(BIONZ-X) allow still image
resolution equivalent to the
sizes described.
*4
[ SteadyShot] is set to
[Standard] or [Off].
*5
[ SteadyShot] is set to
[Active].
Input/Output connectors
HDMI OUT jack: HDMI micro
connector
PROJECTOR IN jack: HDMI micro
connector
MIC input jack: Stereo minijack
(
3.5 mm)
Headphone jack: Stereo minijack
(
3.5 mm)
USB jack: Type A (Built-in USB)
Multi/Micro USB Terminal*
* Supports Micro USB compatible
devices.
USB connection is only for output
(HDR-PJ810E/PJ820E).
LCD monitor
Picture: 7.5 cm (3.0 type, aspect
ratio 16:9)
Total number of pixels: 921 600
(640 × 1 440)
Projector
Projection type: DLP
Light source: LED (R/G/B)
Focus: Manual
Throw Distance: 0.5 m (1.6 feet) or
over
Resolution (output): 854 × 480
Continuous projection time (when
using the supplied battery
pack): Approx. 2 h.
Wireless LAN
Supported standard:
IEEE 802.11 b/g/n
Frequency: 2.4 GHz
Supported security protocols:
WEP/WPA-PSK/WPA2-PSK
Configuration method: WPS (Wi-Fi
Protected Setup)/manual
Access method: Infrastructure
Mode
NFC: NFC Forum Type 3 Tag
compliant
General
Power requirements:
DC 6.8 V/7.2 V (battery pack),
DC 5 V 1 500 mA (AC Adaptor),
DC 8.4 V (DC IN jack)
USB Charging: DC 5 V 1 500 mA
Average power consumption:
During camera recording using the
viewfinder at normal
brightness: 2.9 W
During camera recording using
LCD monitor at normal
brightness: 3.1 W
Operating temperature: 0 °C to
40 °C (32 °F to 104 °F)
Storage temperature: –20 °C to
+60 °C (–4 °F to +140 °F)
Dimensions (approx.):
67.5 mm × 72.5 mm × 134 mm
(2 3/4 in. × 2 7/8 in. × 5 3/8 in.)
(w/h/d) including the
projecting parts
67.5 mm × 72.5 mm × 134 mm
(2 3/4 in. × 2 7/8 in. × 5 3/8 in.)
(w/h/d) including the
projecting parts, the supplied